Jump to content

how to update the bios to make a hp notebook linux-ready


Maze

Recommended Posts

hello dear linux-experts

i have installed opensuse leap 42.1 on a HP Notebooks hp 14 r 103ng -


the login and logout / shootdown / poweroff behaviour is very very strange.
 

to sume up.  i have issues with the poweroff- function

it freezes every time

 

i guess that i have to update the  Bios to make it running with Linux

 

 

see the following commmands




martin@linux-o61y:~> dmesg | egrep -i"err|warn|fail|fault|acpi|apic"
[    0.000000] Linux version 4.1.12-1-default (geeko@buildhost) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP PREEMPT Thu Oct 29 06:43:42 UTC 2015 (e24bad1)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.1.12-1-default root=UUID=ebbf92d1-4132-4103-ac7e-c8fbf2406a8b resume=/dev/sda5 splash=silent quiet showopts
[    0.000000] BIOS-e820: [mem 0x0000000079265000-0x0000000079364fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000079365000-0x00000000793a4fff] ACPI data
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000] MTRR variable ranges enabled:
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000793A4120 00008C (v01 HPQOEM SLIC-MPC 00000003      01000013)
[    0.000000] ACPI: FACP 0x00000000793A1000 00010C (v05 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.000000] ACPI: DSDT 0x000000007938F000 00D551 (v02 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.000000] ACPI: FACS 0x000000007931C000 000040
[    0.000000] ACPI: UEFI 0x00000000793A3000 000236 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.000000] ACPI: HPET 0x00000000793A0000 000038 (v01 HPQOEM INSYDE   00000003 HP   00040000)
[    0.000000] ACPI: LPIT 0x000000007939F000 000104 (v01 HPQOEM INSYDE   00000003 HP   00040000)
[    0.000000] ACPI: APIC 0x000000007939E000 000084 (v03 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.000000] ACPI: MCFG 0x000000007939D000 00003C (v01 HPQOEM INSYDE   00000003 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000007938D000 000763 (v01 HPQOEM INSYDE   00003000 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000007938C000 000290 (v01 HPQOEM INSYDE   00003000 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000007938B000 00017A (v01 HPQOEM INSYDE   00003000 HP   00040000)
[    0.000000] ACPI: UEFI 0x000000007938A000 000042 (v01 HPQOEM INSYDE   00000000 HP   00040000)
[    0.000000] ACPI: SSDT 0x0000000079383000 0064BE (v01 HPQOEM INSYDE   00001000 HP   00040000)
[    0.000000] ACPI: SSDT 0x0000000079382000 00059A (v01 HPQOEM INSYDE   00001000 HP   00040000)
[    0.000000] ACPI: FPDT 0x0000000079381000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.12-1-default root=UUID=ebbf92d1-4132-4103-ac7e-c8fbf2406a8b resume=/dev/sda5 splash=silent quiet showopts
[    0.000000] lapic_timer_frequency = 332800
[    0.000038] pid_max: default: 32768 minimum: 301
[    0.000052] ACPI: Core revision 20150410
[    0.043400] ACPI: All ACPI Tables successfully acquired
[    0.070735] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.216363] PM: Registering ACPI NVS region [mem 0x79265000-0x79364fff] (1048576 bytes)
[    0.236603] ACPI: bus type PCI registered
[    0.236607] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.241290] ACPI: Added _OSI(Module Device)
[    0.241295] ACPI: Added _OSI(Processor Device)
[    0.241298] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.241300] ACPI: Added _OSI(Processor Aggregator Device)
[    0.246087] ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[    0.246099] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.IPCL] (Node ffff88017b0c1dd8), AE_NOT_FOUND (20150410/psparse-536)
[    0.246110] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.PCLK] (Node ffff88017b0c1e28), AE_NOT_FOUND (20150410/psparse-536)
[    0.246119] ACPI Error: Method parse/execution failed [\_SB_.TBSW] (Node ffff88017b0c2810), AE_NOT_FOUND (20150410/psparse-536)
[    0.246128] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff88017b0c26f8), AE_NOT_FOUND (20150410/psparse-536)
[    0.246136] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._REG] (Node ffff88017b0bbce8), AE_NOT_FOUND (20150410/psparse-536)
[    0.246450] ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
[    0.246459] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.IPCL] (Node ffff88017b0c1dd8), AE_NOT_FOUND (20150410/psparse-536)
[    0.246469] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.PCLK] (Node ffff88017b0c1e28), AE_NOT_FOUND (20150410/psparse-536)
[    0.246478] ACPI Error: Method parse/execution failed [\_SB_.TBSW] (Node ffff88017b0c2810), AE_NOT_FOUND (20150410/psparse-536)
[    0.246486] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff88017b0c26f8), AE_NOT_FOUND (20150410/psparse-536)
[    0.246494] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._REG] (Node ffff88017b0bbce8), AE_NOT_FOUND (20150410/psparse-536)
[    0.262361] ACPI: Dynamic OEM Table Load:
[    0.262377] ACPI: SSDT 0xFFFF88017A71E800 00045B (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.263889] ACPI: Dynamic OEM Table Load:
[    0.263901] ACPI: SSDT 0xFFFF88017A71E000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.266152] ACPI: Dynamic OEM Table Load:
[    0.266164] ACPI: SSDT 0xFFFF88017A718A00 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.267569] ACPI: Dynamic OEM Table Load:
[    0.267579] ACPI: SSDT 0xFFFF88017A71BDC0 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.271293] ACPI : EC: EC started
[    0.892558] ACPI: Interpreter enabled
[    0.892573] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[    0.892584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.892620] ACPI: (supports S0 S3 S4 S5)
[    0.892624] ACPI: Using IOAPIC for interrupt routing
[    0.892709] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.000520] ACPI: Power Resource [USBC] (on)
[    1.008865] ACPI: Power Resource [PLPE] (on)
[    1.009293] ACPI: Power Resource [PLPE] (on)
[    1.020683] ACPI: Power Resource [CLK0] (on)
[    1.020786] ACPI: Power Resource [CLK1] (on)
[    1.097364] ACPI: Power Resource [FN00] (off)
[    1.097669] ACPI: Power Resource [FN01] (off)
[    1.097946] ACPI: Power Resource [FN02] (off)
[    1.098220] ACPI: Power Resource [FN03] (off)
[    1.098499] ACPI: Power Resource [FN04] (off)
[    1.100136] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.100149] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.101036] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    1.101508] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    1.103033] pci 0000:00:14.0: System wakeup disabled by ACPI
[    1.103882] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.104128] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    1.104374] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    1.104630] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    1.105021] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.106203] pci 0000:02:00.0: System wakeup disabled by ACPI
[    1.112830] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.120907] pci 0000:04:00.0: System wakeup disabled by ACPI
[    1.181683] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.181896] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.182106] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.182317] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.182527] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.182737] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.182948] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.183159] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.187782] ACPI: Enabled 7 GPEs in block 00 to 3F
[    1.188044] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    1.188734] PCI: Using ACPI for IRQ routing
[    1.190424] NetLabel:  unlabeled traffic allowed by default
[    1.202733] pnp: PnP ACPI init
[    1.202859] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.203057] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.203333] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.203421] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.203509] pnp 00:04: Plug and Play ACPI device, IDs AUI1712 PNP0f13 (active)
[    1.257336] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.260753] pnp: PnP ACPI: found 6 devices
[    1.269442] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.269470] Switched to clocksource acpi_pm
[    1.269627] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[    1.269641] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    1.269654] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    1.269667] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    1.269699] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    1.269711] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    1.269721] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[    1.269734] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    2.870801] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    2.870998] PCI: CLS 64 bytes, default 64
[    4.001588] Scanning for low memory corruption every 60 seconds
[    4.004753] io scheduler cfq registered (default)
[    4.010680] intel_idle: lapic_timer_reliable_states 0xffffffff
[    5.636877] ACPI: Power Button [PWRB]
[    5.637270] ACPI: Lid Switch [LID0]
[    5.637434] ACPI: Power Button [PWRF]
[    5.638938] sdhci: Copyright(c) Pierre Ossman
[    5.681607] ACPI: bus type USB registered
[    5.717242] usb usb1: Manufacturer: Linux 4.1.12-1-default ehci_hcd
[    5.722147] usb usb2: Manufacturer: Linux 4.1.12-1-default xhci-hcd
[    5.723541] usb usb3: Manufacturer: Linux 4.1.12-1-default xhci-hcd
[    5.760498] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.162518] usb: failed to peer 2-3-port2 and usb3-port1 by location (2-3-port2:none) (usb3-port1:usb2-port1)
[    6.162520] usb 2-3-port2: failed to peer to usb3-port1 (-16)
[   12.556647] ACPI: Thermal Zone [TZ00] (13 C)
[   12.557486] ACPI: Thermal Zone [TZ01] (23 C)
[   12.557694] ACPI: Thermal Zone [TZ02] (28 C)
[   12.975720] ACPI: AC Adapter [ACAD] (on-line)
[   13.055120] ACPI: Battery Slot [BAT1] (battery present)
[   13.270383] ACPI Warning: SystemIO range 0x0000000000002000-0x000000000000201F conflicts with OpRegion 0x0000000000002000-0x000000000000200F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
[   13.270394] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1339.500254] kcmshell5[2429]: segfault at 0 ip 00007ff4b7d62e6a sp 00007ffe60e65260 error 4 in libqtquickcontrolsplugin.so[7ff4b7d25000+d5000]
[ 4679.464239] perf interrupt took too long (3699 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 6659.273497] perf interrupt took too long (5053 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
martin@linux-o61y:~>
linux-o61y:/home/martin # lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 0e)
        Subsystem: Hewlett-Packard Company Device [103c:220f]
        Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e)
        Subsystem: Hewlett-Packard Company Device [103c:220f]
        Kernel driver in use: i915
        Kernel modules: i915
00:13.0 SATA controller [0106]: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller [8086:0f23] (rev 0e)
        Subsystem: Hewlett-Packard Company Device [103c:220f]
        Kernel driver in use: ahci
00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI [8086:0f35] (rev 0e)
        Subsystem: Hewlett-Packard Company Device [103c:220f]
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0e)
        Subsystem: Hewlett-Packard Company Device [103c:220f]
        Kernel driver in use: mei_txe
        Kernel modules: mei_txe
00:1b.0 Audio device [0403]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller [8086:0f04] (rev 0e)
        Subsystem: Hewlett-Packard Company Device [103c:220f]
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 [8086:0f48] (rev 0e)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 [8086:0f4a] (rev 0e)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 [8086:0f4c] (rev 0e)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 4 [8086:0f4e] (rev 0e)
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB EHCI [8086:0f34] (rev 0e)
        Subsystem: Hewlett-Packard Company Device [103c:220f]
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 0e)
        Subsystem: Hewlett-Packard Company Device [103c:220f]
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich
00:1f.3 SMBus [0c05]: Intel Corporation Atom Processor E3800 Series SMBus Controller [8086:0f12] (rev 0e)
        Subsystem: Hewlett-Packard Company Device [103c:220f]
        Kernel modules: i2c_i801
02:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01)
        Subsystem: Hewlett-Packard Company AR9485/HB125 802.11bgn 1×1 Wi-Fi Adapter [103c:1838]
        Kernel driver in use: ath9k
        Kernel modules: ath9k
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader [10ec:5229] (rev 01)
        Subsystem: Hewlett-Packard Company Device [103c:220f]
        Kernel driver in use: rtsx_pci
        Kernel modules: rtsx_pci
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)
        Subsystem: Hewlett-Packard Company Device [103c:220f]
        Kernel driver in use: r8169
        Kernel modules: r8169
       

see the kernel 

linux-o61y:/home/martin # uname -r
4.1.12-1-default

to sume up.  i have issues with the poweroff- function

it freezes every time

Link to comment
Share on other sites

This thread is more than a year old. Please don't revive it unless you have something important to add.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.