ajoo Posted June 19, 2018 Share Posted June 19, 2018 Hi all, My project folder on my ubuntu server lies at this location (a) : /home/vagrant/website I had copied my project at /var/www/public/ ( I created the public folder under /var/www/. The other folder by default is html which contains the default index.php displaying the phpinfo) I now wished to create a symlink to my project folder at (a). SO i deleted my project folder and files under the public folder and instead created the symlinks. This is what the public folder looks like now: vagrant@vagrant:/var/www/public$ ls -l total 0 lrwxrwxrwx 1 vagrant www-data 28 Jun 19 10:21 project -> /home/vagrant/website/project lrwxrwxrwx 1 vagrant www-data 27 Jun 19 10:21 proj_inn -> /home/vagrant/website/proj_inn lrwxrwxrwx 1 vagrant www-data 27 Jun 19 10:21 mylibs -> /home/vagrant/website/mylibs vagrant@vagrant:/var/www/public$ However when I try and access my project page on the browser, it does not show up. Instead the phpinfo page from the default index.php is displayed. Am I making a mistake or can't symlinks be used as I am trying to use them?? Thanks all ! Link to comment Share on other sites More sharing options...
ajoo Posted June 19, 2018 Author Share Posted June 19, 2018 Hi all, There seems to be something else the issue. Since I have recopied the actual directories and files back into public, still it rums the default index.php outputting the default ubuntu page. So it seems not to be a symlink issue but something else. I would be grateful for any hints on what i should look for or try , Thanks all Link to comment Share on other sites More sharing options...
requinix Posted June 19, 2018 Share Posted June 19, 2018 The domain name as seen in the browser isn't matching one of the site configurations used by Apache/nginx. Either there is no configuration, or it's not enabled, or Apache/nginx haven't been restarted since adding the configuration, or the domain names don't match. Link to comment Share on other sites More sharing options...
ajoo Posted June 19, 2018 Author Share Posted June 19, 2018 Hi requinix, Long time ! I hope you are good. The actual error was really dumb. I had not changed the https port 443 back to 80 in the conf file of the new server where there was no SSL certificate. So that seems to be a configuration mismatch. However I do have a related question which I will ask later since I am trying out a few things to be a little bit clearer or sort it altogether. It has to do with symlinks. I'll come back later. Meanwhile this issue is sorted. Thanks loads. Link to comment Share on other sites More sharing options...
ajoo Posted June 20, 2018 Author Share Posted June 20, 2018 Hi requinix and all ! So here's my related question that I mentioned in the last mail. I have 2 VPS's identical in all respect and working. In the first VPS, my /var/www folder is organized as follows: Quote vagrant@vagrant:/var/www$ ls -l total 4 drwxr-xr-x 2 root root 4096 Jun 19 11:03 html lrwxrwxrwx 1 root root 20 Dec 26 12:22 public -> /home/vagrant/project1 vagrant@vagrant:/var/www/public$ ls -l total 54 drwx--x--- 1 vagrant www-data 0 Feb 13 11:40 code_testers drwxrwxr-x 1 vagrant www-data 8192 Apr 21 20:13 webroot1 drwx--x--- 1 vagrant www-data 4096 Feb 13 11:40 aboveroot1 drwx--x--- 1 vagrant www-data 4096 Apr 9 14:04 secure and in the 2nd VPS as Quote vagrant@vagrant:/var/www$ ls -l total 8 drwxr-xr-x 2 root root 4096 Jun 18 08:57 html drwxr-xr-x 2 root root 4096 Jun 20 03:17 public vagrant@vagrant:/var/www lrwxrwxrwx 1 root root 28 Jun 20 03:17 webroot2 -> /home/vagrant/web/webroot2 lrwxrwxrwx 1 root root 27 Jun 20 03:17 aboveroot2 -> /home/vagrant/web/aboveroot2 lrwxrwxrwx 1 root root 27 Jun 20 03:17 secure -> /home/vagrant/web/secure vagrant@vagrant:/var/www/public$ There is a folder called images inside the aboveroot1/(2) folders in both VPSes. This stores images of the registered users and is mostly there for the purpose of editing, though not by the user but by an admin. folder permissions on images in both VPSes is drwx-wx---- or (730) while the file permissions are -rw-rw--- ( 660 ). While VPS1 displays the pictures from images folder just as it should, in the form, VPS2 fails to do so. I suspect that the 2nd method is the right way of setting up symlinks and that VPS1 is exposing the aboveroot1 folder as publicly accessible. If my assumption is correct and I go the VPS2 way, then, how do I display the picture files from inside the images folder? Can i do that by changing permissions on the folders OR would i have to expose the images folder and bring/move it from inside the aboveroot1(2) to under the webroot ? I hope i could explain my issue clearly and look forward to your replies and suggestions, Thanks all ! Link to comment Share on other sites More sharing options...
ajoo Posted June 21, 2018 Author Share Posted June 21, 2018 Hi all ! I hope someone can check my last thread of this topic and offer some advise. Thanks all ! Link to comment Share on other sites More sharing options...
Featured Comment gizmola Posted June 21, 2018 Featured Comment Share Posted June 21, 2018 A symlink does not magically give you rights to anything that you don't have rights to on the non-symlinked folder, both from an ownership and permissions standpoint. It would also help if you specified what web server/php configuration you are running. There are settings like FollowSymlinks you might need to investigate and verify. Link to comment Share on other sites More sharing options...
ajoo Posted June 22, 2018 Author Share Posted June 22, 2018 Hi Gizmola & Requinix, Thanks for the inputs. You were correct, both that is. There was a path error in the xsendfile module. Gizmolas reply set me thinking. I cannot find the button that would set this thread as solved with a best reply else I would do so. Thanks again ! Link to comment Share on other sites More sharing options...
requinix Posted June 22, 2018 Share Posted June 22, 2018 52 minutes ago, ajoo said: I cannot find the button that would set this thread as solved with a best reply else I would do so. IP.Board decided that nobody needed it anymore so they got rid of it And if their codebase wasn't so terrible I'd write a plugin to add it back. But you can Like/Thanks posts. Link to comment Share on other sites More sharing options...
ajoo Posted June 22, 2018 Author Share Posted June 22, 2018 I think this feature was really great since one could save tons of time by simply focusing on looking for a solution from answered questions instead of going through each & every similar question. Further it let one zoom down directly to the correct answer in the thread ! really sad ! Thank you. Link to comment Share on other sites More sharing options...
requinix Posted June 22, 2018 Share Posted June 22, 2018 I just made some changes. Do you see a "Recommend" link at the bottom of posts? I suspect not... Link to comment Share on other sites More sharing options...
ajoo Posted June 22, 2018 Author Share Posted June 22, 2018 Hi requinix, I do have a recommended link at the top of the page. and there's a Featured Link , like a star in a down arrow, on Gizmola's post. So how do we do it ?? This would serve nicely to show that the topic is answered and closed ! Thanks ! Link to comment Share on other sites More sharing options...
ajoo Posted June 22, 2018 Author Share Posted June 22, 2018 Hi, It however does not show up in the list of topics to indicate that a topic is answered and closed. Wish you could do something about that too ! Thanks Link to comment Share on other sites More sharing options...
requinix Posted June 22, 2018 Share Posted June 22, 2018 1 hour ago, ajoo said: I do have a recommended link at the top of the page. and there's a Featured Link , like a star in a down arrow, on Gizmola's post. Okay, yes, but do you see a Recommend link at the bottom of each post? By the Quote? 1 hour ago, ajoo said: It however does not show up in the list of topics to indicate that a topic is answered and closed. Wish you could do something about that too ! I can look into it but I suspect it won't be easy enough for me to just do. If it requires writing a plugin then I'd really rather not have to bother. Truth is the Mark Solved thing didn't actually get a whole lot of use... Link to comment Share on other sites More sharing options...
requinix Posted June 22, 2018 Share Posted June 22, 2018 1 hour ago, requinix said: I can look into it but I suspect it won't be easy enough for me to just do. If it requires writing a plugin then I'd really rather not have to bother. Truth is the Mark Solved thing didn't actually get a whole lot of use... Made a couple small tweaks: in the forum view, on the left of each thread where there used to be a star or circle (or nothing) there can now be a check. Shows if there is a recommended post. I also made a similar change somewhere else but I don't know where it is... tempted to revert but meh, the syntax is good so it should be fine. I did the check because that's the only thing I saw readily possible - didn't see markup to support something like the label style the old forum had. The change isn't in other places. And if people can't see the Recommend link then I'll figure out where that's all managed tomorrow because I think I'll have to go into the IPB source to find out. edit: Oh, I see something better I can do. Tomorrow. Link to comment Share on other sites More sharing options...
ajoo Posted June 22, 2018 Author Share Posted June 22, 2018 Hi Requinix, No, there is no recommend link at the bottom near the quote. The check would be just fine. What's required is an indication that the problem is solved or had a best reply. So I guess the checks would do the job well. You know, the main reason I think this feature was not used is that often, there is more than one reply to fit the best category and the user is in a quandary regarding which to select as the best. Happened with me so many times. Even in this very question. Lol !!, Your reply was correct but Gizmola's provided a deeper insight & got me thinking. All the best for your new idea !! Thanks !! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.