dil_bert Posted February 15, 2019 Share Posted February 15, 2019 dear community i own a udoo quad which Armbian does fit to this hardware? Quote s://www.udoo.org/docs/Cookbook_Linux/Understanding_Linux_Software_Management_And_Installing.html UDOO DUAL/QUAD retail line up consists of three models, sharing most of the features and different only for connectivity and i.MX6 processor used. All three models feature an embedded Arduino compatible section based on Arduino Due schematic. UDOO DUAL/QUAD’s dimensions are: 4.33 inch x 3.35 inch (11 cm x 8.5 cm). NXP® i.MX6Quad, 2\4 x ARM® Cortex™-A9 core @ 1GHz with ARMv7A instruction set GPU Vivante GC 2000 for 3D + Vivante GC 355 for 2D (vector graphics) + Vivante GC 320 for 2D Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due) RAM DDR3 1GB 76 fully available GPIO with Arduino compatible R3 1.0 pinout HDMI and LVDS + Touch 2 Micro USB (1 OTG) 2 USB 2.0 type A and 1 USB 2.0 internal pin header (requires adapter cable) Analog Audio and Mic jacks CSI Camera Connection on board Micro SD card reader (boot device) Power Supply (6-15V DC) and External Battery connector Gigabit Ethernet RJ45 (10/100/1000 MBit) WiFi Module SATA connector with power header love to hear from you Link to comment Share on other sites More sharing options...
dil_bert Posted February 15, 2019 Author Share Posted February 15, 2019 https://www.armbian.com/udoo-quad/ Armbian Stretch legacy kernel 4.4.y Armbian Bionic legacy kernel 4.4.y Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.