Jump to content

Data not showing correctly from loop

Texan78

By Texan78
in PHP Coding Help

 Share
Go to solution Solved by mac_gyver,

Recommended Posts

Texan78 Advanced Member

Texan78

Posted
Posted

Forgive me in advance. I will try to explain this the best I can and I may not explain it correctly so please bear with me and if anyone has any questions I will do my best to answer them. 

 

I have this script I am trying to modify to make some adjustments. Please note, I did not write this script. 

 

You can see the page from the link below.

 

http://www.mesquiteweather.net/wxquake.php 

 

Below the map is a table. This is what I added from the variables that were available in the script. Here is my problem. It should be showing 3 separate events but it is only showing one. The table is displayed by using "print $tData;". I have moved it around but I can't get it to show all three events. It only shows 1 event or it shows 3 of the same event or it shows multiple duplicates of the same event. So it has something to do with the placement and the loop but, I can't figure out where to place it so it will display the correct events. 

 

This is the code I use to create the tables and display.

$bbrdr = 'border-bottom:thin solid black';       // bottom
$lbrdr = 'border-left:thin solid black';         // left
$rbrdr = 'border-right:thin solid black';        // right
$tbrdr = 'border-top:thin solid black';          // top
$sbrdr = 'border-right:thin solid black; '.
         'border-left:thin solid black';         // side

//Define table to display after each storm report
$afterTable = "<table style='margin-bottom: 10px;' border='0' cellpadding='0' cellspacing='0' width='100%'><tbody><tr><td><img alt='' src='images/1pixel.gif' border='0' height='7' width='7'></td><td class='shadow-mid' width='100%'><img alt='' src='images/1pixel.gif' border='0' height='7' width='7'></td><td><img alt='' src='images/1pixel.gif' border='0' height='7' width='7'></td></tr><tbody></table>\n";


 $magScale = '';

           switch($magnitude)
{
              case '0':
                    $magScale = 'rgba(0, 255, 255, 0.2)';
                             break;
              case '1':
                    $magScale = 'rgba(0, 0, 255, 0.2)';
                             break;
              case '2':
                    $magScale = 'rgba(0, 255, 0, 0.2)';
                             break;
              case '3':
                    $magScale = 'rgba(255, 255, 0, 0.2)';
                             break;
              case '4':
                    $magScale = 'rgba(255, 153, 51, 0.2)';
                             break;
              case '5':
                    $magScale = 'rgba(255, 0, 0, 0.2)';
                             break;

}



// Let's assign the table some styles
    $tableStyle = "width:{$width}; margin:0px auto; background-color:{$bkgColor};";
    $td1Style = "{$tbrdr};{$sbrdr}; padding:2px 0px 2px 6px;  background-image:url({$imagesDir}headerbgd2.gif); color:{$dtColor};";
    $td2Style = "{$sbrdr}; padding:6px 0px 0px 6px; background-color:{$magScale};";
    $td3Style = "{$sbrdr}; line-height:5px; background-color:{$magScale};";
    $td4Style = "{$sbrdr}; {$bbrdr}; padding: 2px 6px 6px 6px; background-color:{$magScale};";

 // construct data for table display
    $tData .= "<table style='{$tableStyle}' cellpadding='0' cellspacing='0'>\n";
    $tData .= "<tbody>\n";
    $tData .= "  <tr><td style='{$td1Style}'><b>Magnitude {$magnitude}</b></td></tr>\n";
    $tData .= "  <tr>\n";
    $tData .= "    <td style='{$td2Style}'>Local Time: <span style=\"display: none; front-weight: strong\">$Qtimestamp</span>$QDateTime   - Distance to Epicenter: <span style=\"display:none\">$distKsort</span><b>$dText</b></td>\n";
    $tData .= "  </tr>\n";
    $tData .= "  <tr><td style='{$td3Style}'> </td></tr>\n";
    $tData .= "  <tr><td style='{$td4Style}'>Epicenter Near: <b>{$location}</b></td></tr>\n";
    $tData .= "</tbody>\n";
    $tData .= "</table>\n";
    $tData .=  $afterTable;

Then like I said display that data using 

print $tData;

Here is the snippet where I have inserted the code above. 

<?php
	    $doneHeader = 1;
	  } // end doneHeader

// --------------- customize HTML if you like -----------------------
      $JSONout .= "$comma";
	  $Jloc = strip_tags($location);
	  $Jmag = strip_tags($magnitude);
	   $JSONout .= " {\"loc\":\"$Jloc\",\"lat\":\"$latitude\",\"long\":\"$longitude\",\"mag\":\"$Jmag\",\"url\":\"$mapURL\",\"time\":\"$QDateTime\",\"dist\":\"$dText\",\"depth\":\"$depth\"}";
       $comma = ",\n";

	  } //* else {print "<!-- lat='$latitude' long='$longitude' reject distance $distanceK > $maxDistance for $location -->\n"; } */// end maxdistance

	 } // end minRichter

  } // end foreach loop


// finish up.  Write trailer info

	  if ($doneHeader) {
// --------------- customize HTML if you like -----------------------

  print $tData;

?>

<?php
		 print "<p>$quakesFound ". langtransstr("earthquakes found. Click on location or map links for more details from the <a href=\"$mapMainURL\">USGS</a>")."</p>\n";
	  } else {
// --------------- customize HTML if you like -----------------------
        if(strlen($content) > 10) {
  	      print "<p class=\"warning\" style=\"margin-top: 2em; text-align:center;\"><img src=\"images/alert.gif\" alt=\"\" /> " .langtransstr("No earthquakes of magnitude")." $minRichter ".langtransstr("or greater within")." $dmaxDist ".langtransstr("reported in last 7 days").".</p>\n";
		} else {
		  print "<h3>".langtransstr('The USGS feed for earthquakes was not available at this time.')."</h3>\n";
		}

	  }

This file is very code heavy so I am not sure what all I need to post. If I need to post more I can. Like I said, I didn't write this script I am just trying to add some modifications. I certainly wouldn't have wrote it this way. Any suggestions would be greatly welcomed as I am banging my head trying to figure this out and it should be rather simple task. 

 

-Thanks

Link to comment
Share on other sites
Texan78 Advanced Member

Texan78

Posted
  • Author
Posted

i recommend showing us the var_export() from your array of data for the three events (so that would could duplicate/experiment with actual data) and the complete code of the loop that's processing that data to build the $tData content.

 

Here is the complete file. I didn't post it all because it is lengthy and I am not sure actually what parts are actually needed. Most of it is settings at the top and the bottom is for the map. The print statement to display the table is at line 668

<?php
// PHP script by Ken True, webmaster@saratoga-weather.org
// quake-json.php
// Version 1.00 - 08-Sep-2012 - initial release as quake-json.php
// Version 1.01 - 09-Sep-2012 - fixed XHTML 1.0-Strict and removed ' GMT' from local time display
// Version 1.02 - 12-Sep-2012 - added diagnostics, map control translations and optional target="_blank" for links
// Version 1.03 - 04-Jan-2013 - added fix for USGS unix timestamp with trailing zero added
// Version 1.04 - 23-May-2013 - added 'home' pin, settings for lat/long via calling page
// Version 1.05 - 24-May-2013 - fixed a CSS styling error for white-space: spec

  $Version = 'quake-json.php V1.05 - 24-May-2013';
//  error_reporting(E_ALL);  // uncomment to turn on full error reporting
//
// script available at http://saratoga-weather.org/scripts.php
//
// you may copy/modify/use this script as you see fit,
// no warranty is expressed or implied.
//
// Customized for: all earthquakes from the new GeoJSON feeds
//   http://earthquake.usgs.gov/earthquakes/feed/geojson/1.0/week
//  which displays all earthquakes > 1.0 magnitude in the past 7 days
//
//
// output: creates XHTML 1.0-Strict HTML page (default)
// Options on URL:
//      tablesonly=Y    -- returns only the body code for inclusion
//                         in other webpages.  Omit to return full HTML.
//      magnitude=N.N   -- screens results looking for Richter magnitudes of
//                          N.N or greater.
//      distance=MMM    -- display quakes with epicenters only within
//                         MMM km of your location
// example URL:
//  http://your.website/quake-json.php?tablesonly=Y&magnitude=2.1&distance=45
//  would return data without HTML header/footer for earthquakes of
//  magnitude 2.1 or larger within a 45 mile radius of your location.
//
// Usage:
//  you can use this webpage standalone (customize the HTML portion below)
//  or you can include it in an existing page:
/*
<?php
  $doIncludeQuake = true;

# uncomment ONE of the $setDistanceDisplay lines to use as template for distance displays
#  $setDistanceDisplay = 'mi (km)';
  $setDistanceDisplay = 'mi';
#  $setDistanceDisplay = 'km (mi)';
#  $setDistanceDisplay = 'km';

  $setDistanceRadius  = 200;  // same units as first unit in $setDistanceDisplay
# NOTE: quakes of magnitude 1.0+ are available for USA locations only.
#  non-USA location earthquakes of magnitude 4.0+ are the only ones available from the USGS
  $setMinMagnitude = '2.0';  // minimum Richter Magnitude to display
  $setHighMagnitude = '4.0';  // highlight this Magnitude and greater

  $setMapZoomDefault = 7;    // default zoom for Google Map 1=world to 13=street
# script will use your $SITE[] values for latitude, longitude, timezone and time display format

  $setDoLinkTarget = true;   // =true to have links open in new page, =false for XHTML 1.0-Strict
  include("quake-json.php");
?>
*/
//  no parms:    include("quake-json.php");
//
//
// settings: --------------------------------------------------------------------
//  change myLat, myLong to your station latitude/longitude,
//  set $ourTZ to your time zone
//    other settings are optional
//
// minRichter= smallest quake to display (world is 4.0+, USA is 1.0+ on USGS
// cacheName is name of file used to store cached USGS webpage
//
//  set to station latitude/longitude (decimal degrees)
  $myLat = 37.27153397;    //North=positive, South=negative decimal degrees
  $myLong = -122.02274323;   //East=positive, West=negative decimal degrees
// The above settings are for saratoga-weather.org location
  $ourLocationName = 'Mesquite, TX';  // city/town name for lat/long above
//
  $myLogo = "images/watermark_MW_GMap.png"; // Logo to place on top left of map

  $dtColor = '#FFF';        // Text color for your table title headings
  $width   = '100%';        // Adjust the overall width for both info table and legend to fit your site.

  $ourTZ = "America/Los_Angeles";  //NOTE: this *MUST* be set correctly to
// translate UTC times to your LOCAL time for the displays.
// Use http://www.php.net/manual/en/timezones.php to find the timezone suitable for
//  your location.
//
//  pick a format for the time to display ..uncomment one (or make your own)
//$timeFormat = 'D, Y-m-d H:i:s T';  // Fri, 2006-03-31 14:03:22 TZone
  $timeFormat = 'D, d-M-Y H:i:s T';  // Fri, 31-Mar-2006 14:03:22 TZone

// setting for how to display distances .. uncomment one below
// note: will be overridden by $SITE['distanceDisplay']  or $setDistanceDisplay if it exists
//
  $distanceDisplay = 'mi (km)';   // display for distances in 'N mi (K km)'
//  $distanceDisplay = 'mi';   // display for distances in 'N mi'
//  $distanceDisplay = 'km (mi)';   // display for distances in 'K km (N mi)'
//  $distanceDisplay = 'km';   // display for distances in 'K km'

  $minRichter = '2.0';   // minimum Richter scale earthquake to display
  $maxDistance = 200;    // quake must be within this number of miles/kilometers to location
                         // specified in $myLat, $myLong latitude/longitude
						 // and miles/kilometers chosen by first entry in $distanceDisplay above

  $highRichter = "5.0"; //change color for quakes >= this magnitude
  $mapZoomDefault = 6;  // default Google Map zoom entry for display (1=world, 13=street)


  $cacheFileDir = './';   // default cache file directory
  $cacheName = "quakesjson.txt";  // used to store the file so we don't have to
  //                          fetch it each time
  $refetchSeconds = 1800;     // refetch every nnnn seconds

  $imagesDir = './ajax-images/';
  $doLinkTarget = true; // =true to add target="_blank" to links in popups

// end of settings -------------------------------------------------------------

if (isset($_REQUEST['sce']) && strtolower($_REQUEST['sce']) == 'view' ) {
   //--self downloader --
   $filenameReal = __FILE__;
   $download_size = filesize($filenameReal);
   header('Pragma: public');
   header('Cache-Control: private');
   header('Cache-Control: no-cache, must-revalidate');
   header("Content-type: text/plain");
   header("Accept-Ranges: bytes");
   header("Content-Length: $download_size");
   header('Connection: close');

   readfile($filenameReal);
   exit;
}
// Constants
// don't change $baseURL or $fileName or script may break ;-)
  $mapMainURL = "http://earthquake.usgs.gov/earthquakes/map/";  //USGS website main link
  $fileName = "http://earthquake.usgs.gov/earthquakes/feed/geojson/1.0/week";
// end of constants

// overrides from Settings.php if available
if(file_exists("Settings.php")) {include_once("Settings.php");}
//if(file_exists("common.php"))   {include_once("common.php");}
global $SITE,$missingTrans;
if (isset($SITE['latitude'])) 	     {$myLat = $SITE['latitude'];}
if (isset($SITE['longitude'])) 	     {$myLong = $SITE['longitude'];}
if (isset($SITE['cityname'])) 	     {$ourLocationName = $SITE['cityname'];}
if (isset($SITE['tz']))              {$ourTZ = $SITE['tz']; }
if (isset($SITE['timeFormat']))      {$timeFormat = $SITE['timeFormat'];}
if (isset($SITE['cacheFileDir']))    {$cacheFileDir = $SITE['cacheFileDir']; }
if (isset($SITE['distanceDisplay'])) {$distanceDisplay = $SITE['distanceDisplay']; }
// end of overrides from Settings.php

# Shim function if run outside of AJAX/PHP template set
# these must be before the missing function is called in the source
if(!function_exists('langtransstr')) {
	function langtransstr($item) {
		return($item);
	}
}
if(!function_exists('langtrans')) {
	function langtrans($item) {
		print $item;
		return;
	}
}

// overrides from including page if any
if (isset($setDistanceDisplay)) { $distanceDisplay = $setDistanceDisplay; }
if (isset($setDistanceRadius))  { $maxDistance = $setDistanceRadius; }
if (isset($setMinMagnitude))    { $minRichter = $setMinMagnitude; }
if (isset($setHighMagnitude))   { $highRichter = $setHighMagnitude; }
if (isset($setMapZoomDefault))  { $mapZoomDefault = $setMapZoomDefault; }
if (isset($setDoLinkTarget))    { $doLinkTarget = $setDoLinkTarget; }
if (isset($setLatitude))     { $myLat = $setLatitude; }
if (isset($setLongitude))    { $myLong = $setLongitude; }
if (isset($setLocationName))     { $ourLocationName = $setLocationName; }
if (isset($setTimeZone))     { $ourTZ = $setTimeZone; }
if (isset($setTimeFormat))   { $timeFormat = $setTimeFormat; }


// ------ start of code -------

// Check parameters and force defaults/ranges
if ( ! isset($_REQUEST['tablesonly']) ) {
        $_REQUEST['tablesonly']="";
}
if (isset($doIncludeQuake) and $doIncludeQuake ) {
  $tablesOnly = "Y";
} else {
  $tablesOnly = $_REQUEST['tablesonly']; // any nonblank is ok
}

if ($tablesOnly) {$tablesOnly = "Y";}

if ( isset($_REQUEST['magnitude']) ) {
   $minRichter = preg_replace("/^[^\d\.]+$/",'',$_REQUEST['magnitude']);
}
if ($minRichter <= "1.0") {$minRichter = "1.0";}
if ($minRichter >= "9.0") {$minRichter = "9.0";}

if ( isset($_REQUEST['highmagnitude']) ) {
   $highRichter = preg_replace("/^[^\d\.]+$/",'',$_REQUEST['highmagnitude']);
}
if ($highRichter <= "1.0") {$highRichter = "1.0";}
if ($highRichter >= "9.0") {$highRichter = "9.0";}

if (isset($_REQUEST['distance']) ) {
    $maxDistance = preg_replace("/^[^\d]+$/",'',$_REQUEST['distance']);
}
if ($maxDistance <= "10") {$maxDistance = "10";}
if ($maxDistance >= "15000") {$maxDistance = "15000";}

// for testing only
if ( isset($_REQUEST['lat']) )     { $myLat = $_REQUEST['lat']; }
if ( isset($_REQUEST['lon']) )     { $myLong = $_REQUEST['lon']; }
if ( isset($_REQUEST['testloc']) ) { setTestLoc($_REQUEST['testloc']); } // allows for test override

if ( isset($_REQUEST['cache'])) {$refetchSeconds = 1; }

$Lang = 'en'; // default language
if ( isset($_REQUEST['lang']))  {$Lang = strtolower($_REQUEST['lang']); }

$Lang = QJ_ISO_Lang($Lang);  // use official abbreviation or 'en' as default

// omit HTML <HEAD>...</HEAD><BODY> if only tables wanted
// --------------- customize HTML if you like -----------------------
if (! $tablesOnly) {
?>
<?php if($doLinkTarget) { // generate XHTML 1.0-Transitional ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<?php } else { // generate XHTML 1.0-Strict header ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<?php } // end DOCTYPE selector ?>
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Refresh" content="300" />
<meta http-equiv="Pragma" content="no-cache" />
<meta http-equiv="Cache-Control" content="no-cache" />
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title><?php langtrans('Earthquakes of magnitude'); ?> <?php print $minRichter; ?> <?php langtrans('within'); ?> <?php print $maxDistance; ?> <?php langtrans('km'); ?></title>
    <style type="text/css">
      body {
        margin: 0 auto;
        padding: 10px 20px 20px;
		width: 640px;
        font-family: Arial;
        font-size: 12pt;
		background-color: white;
		color: black;
      }

      #map-container {
        padding: 5px;
        border-width: 1px;
        border-style: solid;
        border-color: #ccc #ccc #999 #ccc;
        -webkit-box-shadow: rgba(64, 64, 64, 0.5) 0 2px 5px;
        -moz-box-shadow: rgba(64, 64, 64, 0.5) 0 2px 5px;
        box-shadow: rgba(64, 64, 64, 0.1) 0 2px 5px;
        width: 620px;
		display: none;
      }

      #map {
        width: 740px;
        height: 480px;
      }

      #actions {
        list-style: none;
        padding: 0;
      }

      #inline-actions {
        padding-top: 10px;
      }

      .item {
        margin-left: 20px;
      }
    </style>
    <script src="http://maps.google.com/maps/api/js?sensor=false&language=<?php print $Lang; ?>" type="text/javascript"></script>
    <script src="quake-json.js" type="text/javascript"></script>
</head>
<body style="background-color:#FFFFFF;font-family:Arial, Helvetica, sans-serif;font-size:12px">
<?php
}

# Set timezone in PHP5/PHP4 manner
if (!function_exists('date_default_timezone_set')) {
  putenv("TZ=" . $ourTZ);
  } else {
  date_default_timezone_set("$ourTZ");
 }
 print "<!-- $Version -->\n";
 print "<!-- lat=$myLat long=$myLong dist=$maxDistance mag=$minRichter distanceDisplay ='$distanceDisplay' -->\n";

// refresh cached copy of page if needed
// fetch/cache code by Tom at carterlake.org
$cacheName = $cacheFileDir.$cacheName;
global $Debug;
$Debug = '';

if (file_exists($cacheName) and filemtime($cacheName) + $refetchSeconds > time()) {
      print "<!-- using Cached version of $cacheName -->\n";
      $rawhtml = implode('', file($cacheName));
    } else {
	  if($refetchSeconds == 1) { print "<!-- force cache reload -->\n"; }
      print "<!-- loading $cacheName from $fileName -->\n";
      $rawhtml = QJ_fetchUrlWithoutHanging($fileName);
	  print $Debug;
	  $i = strpos($rawhtml,"\r\n\r\n");
	  $headers = substr($rawhtml,0,$i-1);
	  $content = substr($rawhtml,$i+2);
      $RC = '';
	  if (preg_match("|^HTTP\/\S+ (.*)\r\n|",$rawhtml,$matches)) {
	    $RC = trim($matches[1]);
	  }
	  if(!preg_match('|200 |',$RC)) {
         print "<!-- fetch returns RC='".$RC."' for $fileName -->\n";
	  } else {
		$fp = fopen($cacheName, "w");
		if ($fp) {
		  $write = fputs($fp, $rawhtml);
		  fclose($fp);
		} else {
		  print "<!-- unable to write cache file $cacheName -->\n";
		}
	  }
      print "<!-- loading finished. -->\n";
	}


//get the earthquake data JSON entries
  if(strpos($rawhtml,"\r\n\r\n") !== false) {
    list($headers,$content) = explode("\r\n\r\n",$rawhtml); // extract the 'meat' from the response
  } else {
	$headers = '';
	$content = '';
  }
  $utctimestamp = '';
  if(preg_match('|\nLast-Modified: (.*)\n|Ui',$headers,$match)) {
	$udate = trim($match[1]);
	$utimestamp = strtotime($udate);
	print "<!-- data last modified $udate -->\n";
  } elseif (file_exists($cacheName)) {
	$utimestamp = filemtime($cacheName);
	print "<!-- cache data saved ".gmdate($timeFormat,$utimestamp)." UTC -->\n";
  } else {
	$utimestamp = time();  // get unix time for date
	print "<!-- using now as last modified date ".gmdate($timeFormat,$utimestamp)." UTC -->\n";
  }

  $updatedUTC = langtransstr('Update time') . " = " . gmdate($timeFormat,$utimestamp);
  $updated = langtransstr('Update time') . " = " . date($timeFormat,$utimestamp);
  print "<!-- $updatedUTC UTC-->\n";
  print "<!-- $updated  Local-->\n";
  print "<!-- content length=".strlen($content)." -->\n";
  $quakeJSON = array();
  if(strlen($content) > 10) {
	$quakeJSON = json_decode($content,true);
  } else {
	print "<!-- no content to parse -->\n";
	print "<!-- USGS feed for earthquakes was not available at this time. See error messages above -->\n";
  }
  if(strlen($content > 10) and function_exists('json_last_error')) { // report status, php >= 5.3.0 only
	switch (json_last_error()) {
	  case JSON_ERROR_NONE:           $error = '- No errors';                                                break;
	  case JSON_ERROR_DEPTH:          $error = '- Maximum stack depth exceeded';                             break;
	  case JSON_ERROR_STATE_MISMATCH: $error = '- Underflow or the modes mismatch';                          break;
	  case JSON_ERROR_CTRL_CHAR:      $error = '- Unexpected control character found';                       break;
	  case JSON_ERROR_SYNTAX:         $error = '- Syntax error, malformed JSON';                             break;
	  case JSON_ERROR_UTF8:           $error = '- Malformed UTF-8 characters, possibly incorrectly encoded'; break;
	  default:                        $error = '- Unknown error';                                            break;
	}
  $Status .= "<!-- JSON decode $error -->\n";
 }
 $JQUAKES = array();
 if(isset($quakeJSON['features'])) {$JQUAKES = $quakeJSON['features']; }
 print "<!-- found ".count($JQUAKES)." earthquake records -->\n";

 /*  JSON returned format as associative array:
 Array
(
    [type] => FeatureCollection
    [features] => Array
        (
            [0] => Array
                (
                    [type] => Feature
                    [properties] => Array
                        (
                            [mag] => 2.2
                            [place] => 4km NNW of Brawley, California
                            [time] => 1346625108  (UTC timestamp)
                            [tz] => -420   (minutes offset from UTC for local time)
                            [url] => http://earthquake.usgs.gov/earthquakes/eventpage/ci15209889
                            [felt] => 1
                            [cdi] => 2
                            [mmi] =>
                            [alert] =>
                            [status] => AUTOMATIC
                            [tsunami] =>
                            [sig] => 75
                            [net] => ci
                            [code] => 15209889
                            [ids] => ,ci15209889,
                            [sources] => ,ci,
                            [types] => ,dyfi,general-link,geoserve,nearby-cities,origin,scitech-link,
                        )

                    [geometry] => Array
                        (
                            [type] => Point
                            [coordinates] => Array
                                (
                                    [0] => -115.5453 (longitude)
                                    [1] => 33.013   (latitude)
                                    [2] => 12.6  (depth in km)
                                )

                        )

                    [id] => ci15209889
                )

            [1] => Array
                (
                    [type] => Feature
                    [properties] => Array
                        (
                            [mag] => 4.8
                            [place] => 80km SSW of Adak, Alaska
                            [time] => 1346621542
                            [tz] => -720
                            [url] => http://earthquake.usgs.gov/earthquakes/eventpage/usc000cdrv
                            [felt] =>
                            [cdi] =>
                            [mmi] =>
                            [alert] =>
                            [status] => REVIEWED
                            [tsunami] =>
                            [sig] => 354
                            [net] => us
                            [code] => c000cdrv
                            [ids] => ,usc000cdrv,
                            [sources] => ,us,
                            [types] => ,eq-location-map,general-link,geoserve,historical-moment-tensor-map,historical-seismicity-map,nearby-cities,origin,p-wave-travel-times,phase-data,scitech-link,tectonic-summary,
                        )

                    [geometry] => Array
                        (
                            [type] => Point
                            [coordinates] => Array
                                (
                                    [0] => -176.947
                                    [1] => 51.1786
                                    [2] => 46.34
                                )

                        )

                    [id] => usc000cdrv
                )
*/
 // examine, process and format each line -- omit quakes not
 //   meeting the $minRichter and $maxDistance criteria
  $quakesFound = 0;
  $doneHeader = false;
  $comma = '';
  $dmaxDist = $distanceDisplay; // load template
  if(preg_match('|^km|',$dmaxDist)) {
    $maxDistanceMi = round($maxDistance/1.609344,0);
	$maxDistanceKm = $maxDistance;
  } else {
    $maxDistanceMi = $maxDistance;
	$maxDistanceKm = round($maxDistance*1.609344,0);
  }
  $dmaxDist = preg_replace('|mi|',"$maxDistanceMi mi",$dmaxDist);
  $dmaxDist = preg_replace('|km|',"$maxDistanceKm km",$dmaxDist);
  $JSONout = "var data = {\"markers\": [\n";
  $tgt = '';
  if($doLinkTarget) {$tgt = ' target="_blank"';}

  foreach ($JQUAKES as $key => $onequake) {

      $magnitude = $onequake['properties']['mag'];
      $magnitude = sprintf("%1.1F",$magnitude);  // ensure one decimal point displayed

      if ($magnitude >= "$minRichter")  {  // lets process it

      // load local variables
 	  $mapURL = $onequake['properties']['url'];
      // format quake date/time as local time at epicenter
	  $Qtimestamp = $onequake['properties']['time'];
	  if(strlen($Qtimestamp) > 10) {$Qtimestamp = substr($Qtimestamp,0,10); }
	  $QDateTime = gmdate($timeFormat,$Qtimestamp+$onequake['properties']['tz']*60);
	  $QDateTime = preg_replace('| GMT$|i','',$QDateTime); // Remove GMT string from local time text
	  // extract lat/long/depth
	  list($longitude,$latitude,$depth) = $onequake['geometry']['coordinates'];
	  $kmDepth = round($depth,1);
      $miDepth = round($kmDepth/1.609344,1);
	  $depth = $distanceDisplay;
	  $depth = preg_replace('|mi|',"$miDepth mi",$depth);
	  $depth = preg_replace('|km|',"$kmDepth km",$depth);


	  preg_match('!^(\d+)km (\S+) of (.*)$!',$onequake['properties']['place'],$matches);
	  if(isset($matches[2])) {
		  $kmLoc = $matches[1];
		  $locDir = langtransstr($matches[2]);
		  $locText = $matches[3];
		  $miLoc = round($kmLoc/1.609344,0);
		  $location = $distanceDisplay; // load template
		  $location = preg_replace('|mi|',"$miLoc mi",$location);
		  $location = preg_replace('|km|',"$kmLoc km",$location);
		  $location .= " $locDir ".langtransstr('of')." ".$locText;
	  } else {
		  $location = $onequake['properties']['place'];
	  }
	  // provide highlighting for quakes >= $highRichter
	  if ($magnitude >= $highRichter) {
	     $magnitude = "<span style=\"color: red\">$magnitude</span>";
	     $location = "<span style=\"color: red;\">$location</span>";
	  }

	  $distanceM = round(distance($myLat,$myLong,$latitude,$longitude,"M"));
	  $distanceK = round(distance($myLat,$myLong,$latitude,$longitude,"K"));
	  $distKsort = sprintf("%06d",$distanceK); // make an alpha sort key

	  $dText = $distanceDisplay; // load template
	  $dText = preg_replace('|mi|',"$distanceM mi",$dText);
	  $dText = preg_replace('|km|',"$distanceK km",$dText);
	  $compareDistance = preg_match('|^km|',$distanceDisplay)?$distanceK:$distanceM;

      if ($compareDistance <= $maxDistance) { // only print 'close' ones
	  $quakesFound++;    // keep a tally of quakes for summary
	  if (! $doneHeader) {  // print the header if needed

$bbrdr = 'border-bottom:thin solid black';       // bottom
$lbrdr = 'border-left:thin solid black';         // left
$rbrdr = 'border-right:thin solid black';        // right
$tbrdr = 'border-top:thin solid black';          // top
$sbrdr = 'border-right:thin solid black; '.
         'border-left:thin solid black';         // side

//Define table to display after each storm report
$afterTable = "<table style='margin-bottom: 10px;' border='0' cellpadding='0' cellspacing='0' width='100%'><tbody><tr><td><img alt='' src='images/1pixel.gif' border='0' height='7' width='7'></td><td class='shadow-mid' width='100%'><img alt='' src='images/1pixel.gif' border='0' height='7' width='7'></td><td><img alt='' src='images/1pixel.gif' border='0' height='7' width='7'></td></tr><tbody></table>\n";


 $magScale = '';

           switch($magnitude)
{
              case '0':
                    $magScale = 'rgba(0, 255, 255, 0.2)';
                             break;
              case '1':
                    $magScale = 'rgba(0, 0, 255, 0.2)';
                             break;
              case '2':
                    $magScale = 'rgba(0, 255, 0, 0.2)';
                             break;
              case '3':
                    $magScale = 'rgba(255, 255, 0, 0.2)';
                             break;
              case '4':
                    $magScale = 'rgba(255, 153, 51, 0.2)';
                             break;
              case '5':
                    $magScale = 'rgba(255, 0, 0, 0.2)';
                             break;

}



// Let's assign the table some styles
    $tableStyle = "width:{$width}; margin:0px auto; background-color:{$bkgColor};";
    $td1Style = "{$tbrdr};{$sbrdr}; padding:2px 0px 2px 6px;  background-image:url({$imagesDir}headerbgd2.gif); color:{$dtColor};";
    $td2Style = "{$sbrdr}; padding:6px 0px 0px 6px; background-color:{$magScale};";
    $td3Style = "{$sbrdr}; line-height:5px; background-color:{$magScale};";
    $td4Style = "{$sbrdr}; {$bbrdr}; padding: 2px 6px 6px 6px; background-color:{$magScale};";

// construct data for table display
    $tData .= "<table style='{$tableStyle}' cellpadding='0' cellspacing='0'>\n";
    $tData .= "<tbody>\n";
    $tData .= "  <tr><td style='{$td1Style}'><b>Magnitude {$magnitude}</b></td></tr>\n";
    $tData .= "  <tr>\n";
    $tData .= "    <td style='{$td2Style}'>Local Time: <span style=\"display: none; front-weight: strong\">$Qtimestamp</span>$QDateTime   - Distance to Epicenter: <span style=\"display:none\">$distKsort</span><b>$dText</b></td>\n";
    $tData .= "  </tr>\n";
    $tData .= "  <tr><td style='{$td3Style}'> </td></tr>\n";
    $tData .= "  <tr><td style='{$td4Style}'>Epicenter Near: <b>{$location}</b></td></tr>\n";
    $tData .= "</tbody>\n";
    $tData .= "</table>\n";
    $tData .=  $afterTable;
// --------------- customize HTML if you like -----------------------
?>

<?php
	    print "<p><strong> ".langtransstr('Earthquakes in the past 7 days of magnitude')." $minRichter ".langtransstr('or greater within')." $dmaxDist <br/>$updated</strong></p>"; ?>

    <div id="map-container">
      <div class="NWSround" style="text-align: center; padding: 10px 10px 10px 10px;">
      <div id="GMwrapper">
           <div id="map"></div>
    </div>
      </div>
         </div>
         <table width="100%" border="0" cellpadding="0" cellspacing="0"><tbody><tr><td><img alt="" src="images/1pixel.gif" height="7" width="7" border="0" /></td><td class="shadow-mid" width="100%"><img alt="" src="images/1pixel.gif" height="7" width="7" border="0" /></td><td><img alt="" src="images/1pixel.gif" height="7" width="7" border="0" /></td></tr></tbody></table>

<?php if(count($JQUAKES) > 0) { // only do the legend if there is a map to produce ?>
    <script type="text/javascript">
// <![CDATA[
     document.getElementById("map-container").style.display="block"; // got JavaScript enabled.. display map
	// only write the map legend if JavaScript is enabled
    var legend = '<p style="text-align: center"><img src="<?php print $imagesDir; ?>mma_20_green.png" height="20" width="12" alt="Home" style="vertical-align:middle"/> <?php echo $ourLocationName;?> | '+"\n"+
'<img src="<?php print $imagesDir; ?>mma_20_yellow.png" height="20" width="12" alt="Quake" style="vertical-align:middle"/> M<?php print $minRichter;?> - < M<?php print $highRichter; ?> | '+"\n"+
'<img src="<?php print $imagesDir; ?>mma_20_red.png" height="20" width="12" alt="Quake" style="vertical-align:middle"/> M<?php print $highRichter; ?>+ | '+
'<img src="<?php print $imagesDir; ?>m1.png" height="25" width="25" alt="Quake Cluster" style="vertical-align:middle"/> <?php langtrans("Cluster - click to expand details"); ?>'+"</p>\n";
    document.write(legend);
// ]]>
	</script>
<?php } // end of produce legend if a map is produced  ?>
    <noscript><p>
<b><?php langtrans('Enable JavaScript to view the Google Map.'); ?></b>
</p>
    </noscript>
<?php
	    $doneHeader = 1;
	  } // end doneHeader

// --------------- customize HTML if you like -----------------------
      $JSONout .= "$comma";
	  $Jloc = strip_tags($location);
	  $Jmag = strip_tags($magnitude);
	   $JSONout .= " {\"loc\":\"$Jloc\",\"lat\":\"$latitude\",\"long\":\"$longitude\",\"mag\":\"$Jmag\",\"url\":\"$mapURL\",\"time\":\"$QDateTime\",\"dist\":\"$dText\",\"depth\":\"$depth\"}";
       $comma = ",\n";

	  } //* else {print "<!-- lat='$latitude' long='$longitude' reject distance $distanceK > $maxDistance for $location -->\n"; } */// end maxdistance

	 } // end minRichter

  } // end foreach loop


// finish up.  Write trailer info

	  if ($doneHeader) {
// --------------- customize HTML if you like -----------------------

?>

<?php
		 print "<p>$quakesFound ". langtransstr("earthquakes found. Click on location or map links for more details from the <a href=\"$mapMainURL\">USGS</a>")."</p>\n";
	  } else {
// --------------- customize HTML if you like -----------------------
        if(strlen($content) > 10) {
  	      print "<p class=\"warning\" style=\"margin-top: 2em; text-align:center;\"><img src=\"images/alert.gif\" alt=\"\" /> " .langtransstr("No earthquakes of magnitude")." $minRichter ".langtransstr("or greater within")." $dmaxDist ".langtransstr("reported in last 7 days").".</p>\n";
		} else {
		  print "<h3>".langtransstr('The USGS feed for earthquakes was not available at this time.')."</h3>\n";
		}

	  }

	  print $tData;

	$JSONout .= "\n]}\n";

    print "<script type=\"text/javascript\">\n// <![CDATA[\n";
	print $JSONout;
	print '// Generated Google Map code
var markers = [];
var imagesDir = \''.$imagesDir.'\';  // our marker/cluster images locations
var highMag = '.$highRichter.';      // highlight quakes >= this value
var doLinkTarget = '.$doLinkTarget.';    // generate target="_blank" option
MarkerClusterer.IMAGE_PATH = imagesDir+"m";  // set to use our images for clusters

function initialize() {  // Google map will load this function at page-load

	var center = new google.maps.LatLng('.$myLat.','.$myLong.');
	var options = { // options for Google map
	  \'zoom\': '.$mapZoomDefault.',
	  \'panControl\': false,
	  \'center\': center,
	  \'scaleControl\': true,
	  \'zoomControlOptions\': {
      style: google.maps.ZoomControlStyle.SMALL,
      position: google.maps.ControlPosition.RIGHT_TOP
    },

	  \'mapTypeId\': google.maps.MapTypeId.HYBRID
	};
	var cOptions = { // options for markerCluster
	  \'gridSize\': 22,
	  \'minimumClusterSize\': 4,
	  \'averageCenter\': true
	};

	var map = new google.maps.Map(document.getElementById("map"), options);

	function MyLogoControl(controlDiv) {
    controlDiv.style.padding = \'5px\';
    var logo = document.createElement(\'IMG\');
    logo.src = \'images/watermark_MW_GMap.png\';
    logo.style.cursor = \'pointer\';
    controlDiv.appendChild(logo);

    google.maps.event.addDomListener(logo, \'click\', function() {
        window.location = \'http://www.mesquiteweather.net\';
    });
  }

   var logoControlDiv = document.createElement(\'DIV\');
   var logoControl = new MyLogoControl(logoControlDiv);
   logoControlDiv.index = 0; // used for ordering
   map.controls[google.maps.ControlPosition.TOP_LEFT].push(logoControlDiv);

	// Make the info window close when clicking anywhere on the map.
	google.maps.event.addListener(map, \'click\', closeInfoWindow);

	// Create a single instance of the InfoWindow object which will be shared
	// by all Map objects to display information to the user.
	var ourInfoWindow = new google.maps.InfoWindow();

	var markerImageRed    = new google.maps.MarkerImage(imagesDir+"mma_20_red.png");
	var markerImageBlue   = new google.maps.MarkerImage(imagesDir+"mma_20_blue.png");
	var markerImageGreen  = new google.maps.MarkerImage(imagesDir+"mma_20_green.png");
	var markerImageYellow = new google.maps.MarkerImage(imagesDir+"mma_20_yellow.png");
    var markerImageShadow = new google.maps.MarkerImage(imagesDir+"mma_20_shadow.png",
														new google.maps.Size(22, 20),
														new google.maps.Point(0,0),
														new google.maps.Point(0,20)
														);

	for (var i = 0; i < data.markers.length; i++) {
	  var latLng = new google.maps.LatLng(data.markers[i].lat,
		  data.markers[i].long);
      var loc = data.markers[i].loc;
	  var mag = data.markers[i].mag;
	  var url = data.markers[i].url;
	  var qtime = data.markers[i].time;
	  var dist = data.markers[i].dist;
	  var depth = data.markers[i].depth;
	  var useMarkerIcon = markerImageYellow;  // default to WX marker
	  if (mag >= highMag) { useMarkerIcon = markerImageRed;     }

	  var title = "M"+mag+" - "+qtime;

	  var tgt = \'\';
	  if(doLinkTarget > 0) {tgt = \' target="_blank"\'; }
	  var popupHtml = "<small><a href=\""+url+"\""+tgt+"><strong>M"+mag+"</strong></a> - "+
	  qtime+" - '.langtransstr("Depth").': "+depth+"<br/>"+
	  loc+" <br/>"+
	  "'.langtransstr("Distance to epicenter").': "+dist+
      "<br clear=\"left\"/></small>";

	  createMarker(map,latLng,useMarkerIcon,markerImageShadow,title,popupHtml);

	} // end of loop to create markers

	if (data.markers.length > 0 ) {
	  var marker = new google.maps.Marker({
		map: map,
		position: center,
		clickable: true,
		draggable: false,
		icon: markerImageGreen,
		shadow: markerImageShadow,
		title: "'.$ourLocationName.'",
	  });

	}

	var markerCluster = new MarkerClusterer(map, markers, cOptions);

	function  createMarker (map,latLng, useMarkerIcon, markerImageShadow, title, popupHtml) {

	  var marker = new google.maps.Marker({
		map: map,
		position: latLng,
		clickable: true,
		draggable: false,
		icon: useMarkerIcon,
		shadow: markerImageShadow,
		title: title
	  });

	  marker.popupHtml = popupHtml;
	  google.maps.event.addListener(marker, \'click\', function() {
		openInfoWindow(marker);
	  });
	  markers.push(marker);
	}



	function clearClusters(e) {
	  e.preventDefault();
	  e.stopPropagation();
	  markerClusterer.clearMarkers();
	}
	/**
	 * Called when clicking anywhere on the map and closes the info window.
	 */
	function closeInfoWindow () {
	  ourInfoWindow.close();
	};

	/**
	 * Opens the shared info window, anchors it to the specified marker, and
	 * displays the marker\'s position as its content.
	 */
	function openInfoWindow (marker) {
	  ourInfoWindow.setContent(marker.popupHtml);
	  ourInfoWindow.open(map, marker);
	}
} // end of initialize function

// now load it all up and display the map

google.maps.event.addDomListener(window, \'load\', initialize);
// ]]>
';
	print "</script>\n";

// print footer of page if needed
// --------------- customize HTML if you like -----------------------
if (! $tablesOnly ) {
?>

</body>
</html>

<?php
}


// ----------------------------functions -----------------------------------

// get contents from one URL and return as string
 function QJ_fetchUrlWithoutHanging($url,$useFopen=false) {
// thanks to Tom at Carterlake.org for this script fragment
  global $Debug, $needCookie,$timeStamp,$TOTALtime;
  $overall_start = time();
  if (! $useFopen) {
   // Set maximum number of seconds (can have floating-point) to wait for feed before displaying page without feed
   $numberOfSeconds=5;

   // Suppress error reporting so Web site visitors are unaware if the feed fails
   error_reporting(0);

   // Extract resource path and domain from URL ready for fsockopen
   $FullUrl = $url;
   $urlParts = parse_url($url);

   $domain = $urlParts['host'];
   if(isset($urlParts['port'])) {
      $port   = $urlParts['port'];
   } else {
      $port   = 80;
   }
   $resourcePath = $urlParts['path'];
   $resourcePath = preg_replace('|nocache|','?'.$timeStamp,$resourcePath);
   if(isset($urlParts['query']))    {$resourcePath .= "?" . $urlParts['query']; }
   if(isset($urlParts['fragment'])) {$resourcePath .= "#" . $urlParts['fragment']; }
   $T_start = QJ_microtime_float();
   $hostIP = gethostbyname($domain);
   $T_dns = QJ_microtime_float();
   $ms_dns  = sprintf("%01.3f",round($T_dns - $T_start,3));

   $Debug .= "<!-- GET $resourcePath HTTP/1.1 \n      Host: $domain  Port: $port IP=$hostIP-->\n";
//   print "GET $resourcePath HTTP/1.1 \n      Host: $domain  Port: $port IP=$hostIP\n";

   // Establish a connection
   $socketConnection = fsockopen($hostIP, $port, $errno, $errstr, $numberOfSeconds);
   $T_connect = QJ_microtime_float();
   $T_puts = 0;
   $T_gets = 0;
   $T_close = 0;

   if (!$socketConnection)
       {
       // You may wish to remove the following debugging line on a live Web site
       $Debug .= "<!-- Network error: $errstr ($errno) -->\n";
//       print "Network error: $errstr ($errno)\n";
       }    // end if
   else    {
       $xml = '';
	   $getString = "GET $resourcePath HTTP/1.1\r\nHost: $domain\r\nConnection: Close\r\n";
	   if (isset($needCookie[$domain])) {
	     $getString .= $needCookie[$domain] . "\r\n";
		 $Debug .=  "<!-- cookie used '" . $needCookie[$domain] . "' for GET to $domain -->\n";
	   }
	   $getString .= "Accept: text/plain,text/html\r\n";
	   $getString .= "\r\n";
//	   print "Sending:\n$getString\n\n";
       fputs($socketConnection, $getString);
       $T_puts = QJ_microtime_float();

       // Loop until end of file
	   $TGETstats = array();
	   $TGETcount = 0;
       while (!feof($socketConnection))
           {
		   $T_getstart = QJ_microtime_float();
           $xml .= fgets($socketConnection, 16384);
		   $T_getend = QJ_microtime_float();
		   $TGETcount++;
		   $TGETstats[$TGETcount] = sprintf("%01.3f",round($T_getend - $T_getstart,3));
           }    // end while
       $T_gets = QJ_microtime_float();
       fclose ($socketConnection);
       $T_close = QJ_microtime_float();
       }    // end else
   $ms_connect = sprintf("%01.3f",round($T_connect - $T_dns,3));

   if($T_close > 0) {
      $ms_puts = sprintf("%01.3f",round($T_puts - $T_connect,3));
	  $ms_gets = sprintf("%01.3f",round($T_gets - $T_puts,3));
	  $ms_close = sprintf("%01.3f",round($T_close - $T_gets,3));
	  $ms_total = sprintf("%01.3f",round($T_close - $T_start,3));
    } else {
       $ms_puts = 'n/a';
	  $ms_gets = 'n/a';
	  $ms_close = 'n/a';
	  $ms_total = sprintf("%01.3f",round($T_connect - $T_start,3));
   }

   $Debug .= "<!-- HTTP stats:  dns=$ms_dns conn=$ms_connect put=$ms_puts get($TGETcount blocks)=$ms_gets close=$ms_close total=$ms_total secs -->\n";
//   print  "HTTP stats: dns=$ms_dns conn=$ms_connect put=$ms_puts get($TGETcount blocks)=$ms_gets close=$ms_close total=$ms_total secs \n";
//   foreach ($TGETstats as $block => $mstimes) {
//     print "HTTP Block $block took $mstimes\n";
//   }
   $TOTALtime+= ($T_close - $T_start);
   $overall_end = time();
   $overall_elapsed =   $overall_end - $overall_start;
   $Debug .= "<!-- fetch function elapsed= $overall_elapsed secs. -->\n";
//   print "fetch function elapsed= $overall_elapsed secs.\n";
   return($xml);
 } else {
//   print "<!-- using file function -->\n";
   $T_start = QJ_microtime_float();

   $xml = implode('',file($url));
   $T_close = QJ_microtime_float();
   $ms_total = sprintf("%01.3f",round($T_close - $T_start,3));
   $Debug .= "<!-- file() stats: total=$ms_total secs -->\n";
//   print " file() stats: total=$ms_total secs.\n";
   $TOTALtime+= ($T_close - $T_start);
   $overall_end = time();
   $overall_elapsed =   $overall_end - $overall_start;
   $Debug .= "<!-- fetch function elapsed= $overall_elapsed secs. -->\n";
//   print "fetch function elapsed= $overall_elapsed secs.\n";
   return($xml);
 }

   }    // end QJ_fetchUrlWithoutHanging
// ------------------------------------------------------------------

function QJ_microtime_float()
{
   list($usec, $sec) = explode(" ", microtime());
   return ((float)$usec + (float)$sec);
}

// ------------ distance calculation function ---------------------

    //**************************************
    //
    // Name: Calculate Distance and Radius u
    //     sing Latitude and Longitude in PHP
    // Description:This function calculates
    //     the distance between two locations by us
    //     ing latitude and longitude from ZIP code
    //     , postal code or postcode. The result is
    //     available in miles, kilometers or nautic
    //     al miles based on great circle distance
    //     calculation.
    // By: ZipCodeWorld
    //
    //This code is copyrighted and has
	// limited warranties.Please see http://
    //     www.Planet-Source-Code.com/vb/scripts/Sh
    //     owCode.asp?txtCodeId=1848&lngWId=8    //for details.    //**************************************
    //
/*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::*/
    /*:: :*/
    /*:: This routine calculates the distance between two points (given the :*/
    /*:: latitude/longitude of those points). It is being used to calculate :*/
    /*:: the distance between two ZIP Codes or Postal Codes using our:*/
    /*:: ZIPCodeWorld(TM) and PostalCodeWorld(TM) products. :*/
    /*:: :*/
    /*:: Definitions::*/
    /*::South latitudes are negative, east longitudes are positive:*/
    /*:: :*/
    /*:: Passed to function::*/
    /*::lat1, lon1 = Latitude and Longitude of point 1 (in decimal degrees) :*/
    /*::lat2, lon2 = Latitude and Longitude of point 2 (in decimal degrees) :*/
    /*::unit = the unit you desire for results:*/
    /*::where: 'M' is statute miles:*/
    /*:: 'K' is kilometers (default):*/
    /*:: 'N' is nautical miles :*/
    /*:: United States ZIP Code/ Canadian Postal Code databases with latitude & :*/
    /*:: longitude are available at http://www.zipcodeworld.com :*/
    /*:: :*/
    /*:: For enquiries, please contact sales@zipcodeworld.com:*/
    /*:: :*/
    /*:: Official Web site: http://www.zipcodeworld.com :*/
    /*:: :*/
    /*:: Hexa Software Development Center � All Rights Reserved 2004:*/
    /*:: :*/
    /*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::*/
    function distance($lat1, $lon1, $lat2, $lon2, $unit) {
    $theta = $lon1 - $lon2;
    $dist = sin(deg2rad($lat1)) * sin(deg2rad($lat2)) + cos(deg2rad($lat1)) * cos(deg2rad($lat2)) * cos(deg2rad($theta));
    $dist = acos($dist);
    $dist = rad2deg($dist);
    $miles = $dist * 60 * 1.1515;
    $unit = strtoupper($unit);
    if ($unit == "K") {
    return ($miles * 1.609344);
    } else if ($unit == "N") {
    return ($miles * 0.8684);
    } else {
    return $miles;
    }
  }

// ------------------------------------------------------------------
//  testing function to safely set location/distance/zone using testloc= parm
function setTestLoc ( $LOC )
{
  global $myLat,$myLong,$ourTZ,$maxDistance;

  if ($LOC == 'NZ') {
    $myLat = -37.07;
    $myLong = 174.35;
    $ourTZ = "Pacific/Auckland";
	$maxDistance = 1000;
// Yes, the above settings are for Brian Hamilton's Grahams Beach, NZ station
// in honor of his outstanding work as author of Weather-Display software
  } elseif ($LOC == 'JP') {
    $myLat = 35.8499;
    $myLong = 139.97;
    $ourTZ = "Asia/Tokyo";
	$maxDistance = 1000;
  } elseif ($LOC == 'MX') {
     $myLat = 19.3999;
    $myLong = -99.1999;
    $ourTZ = "America/Mexico_City";
	$maxDistance = 1000;
  } elseif ($LOC == 'PR') {
    $myLat = 18.467248;
    $myLong = -66.108963;
    $ourTZ = "America/Puerto_Rico";
	$maxDistance = 2000;
  } elseif ($LOC == 'AK') {
     $myLat = 61.21574783;
    $myLong = -149.86894226;
    $ourTZ = "America/Anchorage";
	$maxDistance = 2000;
  } elseif ($LOC == 'IR') {
     $myLat = 35.68;
    $myLong = 51.3499;
    $ourTZ = "Asia/Tehran";
	$maxDistance = 1000;
  } elseif ($LOC == 'GR') {
     $myLat = 37.983056;
    $myLong = 23.733056;
    $ourTZ = "Europe/Athens";
	$maxDistance = 1000;
  } elseif ($LOC == 'SU') {
     $myLat = 3.0;
    $myLong = 100.0;
    $ourTZ = "Asia/Jakarta";
	$maxDistance = 1000;
  }

}
// ------------------------------------------------------------------

function QJ_ISO_Lang ( $inLang) {
  global $SITE;
  if(isset($SITE['ISOLang'])) {
    $ISOlang = $SITE['ISOLang'];
  } else {
    $ISOlang =  array ( // ISO 639-1 2-character language abbreviations from country domain
	'af' => 'af',
	'bg' => 'bg',
	'ct' => 'ca',
	'dk' => 'da',
	'nl' => 'nl',
	'en' => 'en',
	'fi' => 'fi',
	'fr' => 'fr',
	'de' => 'de',
	'el' => 'el',
	'ga' => 'ga',
	'it' => 'it',
	'he' => 'he',
	'hu' => 'hu',
	'no' => 'no',
	'pl' => 'pl',
	'pt' => 'pt',
	'ro' => 'ro',
	'es' => 'es',
	'se' => 'sv',
	'si' => 'sl',
  );

  }
  if(isset($ISOlang[$inLang])) {
	  return($ISOlang[$inLang]);
  } else {
	  return('en');
  }
}

// --------------end of functions ---------------------------------------

?>
Link to comment
Share on other sites
  • Solution
mac_gyver Prolific Member

mac_gyver

Posted
  • Solution
Posted

the most immediate problem is the code building the $tData content is inside the if (! $doneHeader) { ... } logic, so it will only be executed once. you would need to put the $tData logic after the } // end doneHeader on line 633 so that it gets executed each time through the loop.

Link to comment
Share on other sites
Texan78 Advanced Member

Texan78

Posted
  • Author
Posted

Are you serious? That is what it was? I knew it was easy and had to do with the placement of that logic and that is hard to post all I had tried but, I could have sworn I had tried it there as it makes the most sense. Oh well, it is now working correctly so apparently didn't try it there. Thank you so much for you help. 

Link to comment
Share on other sites
This thread is more than a year old. Please don't revive it unless you have something important to add.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.