aimseeker Posted February 23, 2010 Share Posted February 23, 2010 hey everyone !!!!! I have configured apache 2.2 on my machine and been trying to access it through internet(using public ip)... I have got a "shiro router" and forwarded the port 80 on it, and tried to access the server using h**p:\\my_public_ip:80, but all thats appearing is the router's configuration page(the same one that appears on 192.168.1.1). Since the above method didn't work so i decided to forward a different port (port:200) and changed the listen port to "200" in httpd conf file, after which i was able to access the server using h**p:\\my_local_ip:200, but again no success with the public ip, it now says "unable to connect". note:alongwith ip forwarding i have made the following two changes (and i have no idea what these two settings are for ) 1)allow incoming ping 2)DMZ (demilitarized zone) both these were disabled before...and yeh my router is NAT enabled. Link to comment https://forums.phpfreaks.com/topic/193105-web-server-access-problem/ Share on other sites More sharing options...
steviewdr Posted February 24, 2010 Share Posted February 24, 2010 Make sure you have the firewall disabled on the router if you have one. Link to comment https://forums.phpfreaks.com/topic/193105-web-server-access-problem/#findComment-1017380 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.