Jump to content

Serial Class has long delay

PickOfDestiny89

By PickOfDestiny89
in PHP Coding Help

 Share

Recommended Posts

PickOfDestiny89 Newbie

PickOfDestiny89

Posted
Posted

Hi everybody,

I am currently working with the php_serial.class to send out signals through the serial port of my computer. I set up a webserver on Windows with Apache and its working fine. The only problem is, that when I press the button on the homepage, it takes like 6 seconds to actually send something out the port.

You guys have any ideas why this could be happening?

 

I tested under Windows 7 and XP with the newest version of Apache Server and several different computers with different hardware.

Always the same results.

 

Here is the class:

 



<?php
define ("SERIAL_DEVICE_NOTSET", 0);
define ("SERIAL_DEVICE_SET", 1);
define ("SERIAL_DEVICE_OPENED", 2);

/**
 * Serial port control class
 *
 * THIS PROGRAM COMES WITH ABSOLUTELY NO WARANTIES !
 * USE IT AT YOUR OWN RISKS !
 *
 * @author Rémy Sanchez <thenux@gmail.com>
 * @thanks Aurélien Derouineau for finding how to open serial ports with windows
 * @thanks Alec Avedisyan for help and testing with reading
 * @copyright under GPL 2 licence
 */
class phpSerial
{
	var $_device = null;
	var $_windevice = null;
	var $_dHandle = null;
	var $_dState = SERIAL_DEVICE_NOTSET;
	var $_buffer = "";
	var $_os = "";

	/**
	 * This var says if buffer should be flushed by sendMessage (true) or manualy (false)
	 *
	 * @var bool
	 */
	var $autoflush = true;

	/**
	 * Constructor. Perform some checks about the OS and setserial
	 *
	 * @return phpSerial
	 */
	function phpSerial ()
	{
		setlocale(LC_ALL, "en_US");

		$sysname = php_uname();

		if (substr($sysname, 0, 5) === "Linux")
		{
			$this->_os = "linux";

			if($this->_exec("stty --version") === 0)
			{
				register_shutdown_function(array($this, "deviceClose"));
			}
			else
			{
				trigger_error("No stty availible, unable to run.", E_USER_ERROR);
			}
		}
		elseif(substr($sysname, 0, 7) === "Windows")
		{
			$this->_os = "windows";
			register_shutdown_function(array($this, "deviceClose"));
		}
		else
		{
			trigger_error("Host OS is neither linux nor windows, unable tu run.", E_USER_ERROR);
			exit();
		}
	}

	//
	// OPEN/CLOSE DEVICE SECTION -- {START}
	//

	/**
	 * Device set function : used to set the device name/address.
	 * -> linux : use the device address, like /dev/ttyS0
	 * -> windows : use the COMxx device name, like COM1 (can also be used
	 *     with linux)
	 *
	 * @param string $device the name of the device to be used
	 * @return bool
	 */
	function deviceSet ($device)
	{
		if ($this->_dState !== SERIAL_DEVICE_OPENED)
		{
			if ($this->_os === "linux")
			{
				if (preg_match("@^COM(\d+):?$@i", $device, $matches))
				{
					$device = "/dev/ttyS" . ($matches[1] - 1);
				}

				if ($this->_exec("stty -F " . $device) === 0)
				{
					$this->_device = $device;
					$this->_dState = SERIAL_DEVICE_SET;
					return true;
				}
			}
			elseif ($this->_os === "windows")
			{
				if (preg_match("@^COM(\d+):?$@i", $device, $matches) and $this->_exec(exec("mode " . $device)) === 0)
				{
					$this->_windevice = "COM" . $matches[1];
					$this->_device = "\\.\com" . $matches[1];
					$this->_dState = SERIAL_DEVICE_SET;
					return true;
				}
			}

			trigger_error("Specified serial port is not valid", E_USER_WARNING);
			return false;
		}
		else
		{
			trigger_error("You must close your device before to set an other one", E_USER_WARNING);
			return false;
		}
	}

	/**
	 * Opens the device for reading and/or writing.
	 *
	 * @param string $mode Opening mode : same parameter as fopen()
	 * @return bool
	 */
	function deviceOpen ($mode = "r+b")
	{
		if ($this->_dState === SERIAL_DEVICE_OPENED)
		{
			trigger_error("The device is already opened", E_USER_NOTICE);
			return true;
		}

		if ($this->_dState === SERIAL_DEVICE_NOTSET)
		{
			trigger_error("The device must be set before to be open", E_USER_WARNING);
			return false;
		}

		if (!preg_match("@^[raw]\+?b?$@", $mode))
		{
			trigger_error("Invalid opening mode : ".$mode.". Use fopen() modes.", E_USER_WARNING);
			return false;
		}

		$this->_dHandle = @fopen($this->_device, $mode);

		if ($this->_dHandle !== false)
		{
			stream_set_blocking($this->_dHandle, 0);
			$this->_dState = SERIAL_DEVICE_OPENED;
			return true;
		}

		$this->_dHandle = null;
		trigger_error("Unable to open the device", E_USER_WARNING);
		return false;
	}

	/**
	 * Closes the device
	 *
	 * @return bool
	 */
	function deviceClose ()
	{
		if ($this->_dState !== SERIAL_DEVICE_OPENED)
		{
			return true;
		}

		if (fclose($this->_dHandle))
		{
			$this->_dHandle = null;
			$this->_dState = SERIAL_DEVICE_SET;
			return true;
		}

		trigger_error("Unable to close the device", E_USER_ERROR);
		return false;
	}

	//
	// OPEN/CLOSE DEVICE SECTION -- {STOP}
	//

	//
	// CONFIGURE SECTION -- {START}
	//

	/**
	 * Configure the Baud Rate
	 * Possible rates : 110, 150, 300, 600, 1200, 2400, 4800, 9600, 38400,
	 * 57600 and 115200.
	 *
	 * @param int $rate the rate to set the port in
	 * @return bool
	 */
	function confBaudRate ($rate)
	{
		if ($this->_dState !== SERIAL_DEVICE_SET)
		{
			trigger_error("Unable to set the baud rate : the device is either not set or opened", E_USER_WARNING);
			return false;
		}

		$validBauds = array (
			110    => 11,
			150    => 15,
			300    => 30,
			600    => 60,
			1200   => 12,
			2400   => 24,
			4800   => 48,
			9600   => 96,
			19200  => 19,
			38400  => 38400,
			57600  => 57600,
			115200 => 115200
		);

		if (isset($validBauds[$rate]))
		{
			if ($this->_os === "linux")
			{
				$ret = $this->_exec("stty -F " . $this->_device . " " . (int) $rate, $out);
			}
			elseif ($this->_os === "windows")
			{
				$ret = $this->_exec("mode " . $this->_windevice . " BAUD=" . $validBauds[$rate], $out);
			}
			else return false;

			if ($ret !== 0)
			{
				trigger_error ("Unable to set baud rate: " . $out[1], E_USER_WARNING);
				return false;
			}
		}
	}

	/**
	 * Configure parity.
	 * Modes : odd, even, none
	 *
	 * @param string $parity one of the modes
	 * @return bool
	 */
	function confParity ($parity)
	{
		if ($this->_dState !== SERIAL_DEVICE_SET)
		{
			trigger_error("Unable to set parity : the device is either not set or opened", E_USER_WARNING);
			return false;
		}

		$args = array(
			"none" => "-parenb",
			"odd"  => "parenb parodd",
			"even" => "parenb -parodd",
		);

		if (!isset($args[$parity]))
		{
			trigger_error("Parity mode not supported", E_USER_WARNING);
			return false;
		}

		if ($this->_os === "linux")
		{
			$ret = $this->_exec("stty -F " . $this->_device . " " . $args[$parity], $out);
		}
		else
		{
			$ret = $this->_exec("mode " . $this->_windevice . " PARITY=" . $parity{0}, $out);
		}

		if ($ret === 0)
		{
			return true;
		}

		trigger_error("Unable to set parity : " . $out[1], E_USER_WARNING);
		return false;
	}

	/**
	 * Sets the length of a character.
	 *
	 * @param int $int length of a character (5 <= length <= 
	 * @return bool
	 */
	function confCharacterLength ($int)
	{
		if ($this->_dState !== SERIAL_DEVICE_SET)
		{
			trigger_error("Unable to set length of a character : the device is either not set or opened", E_USER_WARNING);
			return false;
		}

		$int = (int) $int;
		if ($int < 5) $int = 5;
		elseif ($int >  $int = 8;

		if ($this->_os === "linux")
		{
			$ret = $this->_exec("stty -F " . $this->_device . " cs" . $int, $out);
		}
		else
		{
			$ret = $this->_exec("mode " . $this->_windevice . " DATA=" . $int, $out);
		}

		if ($ret === 0)
		{
			return true;
		}

		trigger_error("Unable to set character length : " .$out[1], E_USER_WARNING);
		return false;
	}

	/**
	 * Sets the length of stop bits.
	 *
	 * @param float $length the length of a stop bit. It must be either 1,
	 * 1.5 or 2. 1.5 is not supported under linux and on some computers.
	 * @return bool
	 */
	function confStopBits ($length)
	{
		if ($this->_dState !== SERIAL_DEVICE_SET)
		{
			trigger_error("Unable to set the length of a stop bit : the device is either not set or opened", E_USER_WARNING);
			return false;
		}

		if ($length != 1 and $length != 2 and $length != 1.5 and !($length == 1.5 and $this->_os === "linux"))
		{
			trigger_error("Specified stop bit length is invalid", E_USER_WARNING);
			return false;
		}

		if ($this->_os === "linux")
		{
			$ret = $this->_exec("stty -F " . $this->_device . " " . (($length == 1) ? "-" : "") . "cstopb", $out);
		}
		else
		{
			$ret = $this->_exec("mode " . $this->_windevice . " STOP=" . $length, $out);
		}

		if ($ret === 0)
		{
			return true;
		}

		trigger_error("Unable to set stop bit length : " . $out[1], E_USER_WARNING);
		return false;
	}

	/**
	 * Configures the flow control
	 *
	 * @param string $mode Set the flow control mode. Availible modes :
	 * 	-> "none" : no flow control
	 * 	-> "rts/cts" : use RTS/CTS handshaking
	 * 	-> "xon/xoff" : use XON/XOFF protocol
	 * @return bool
	 */
	function confFlowControl ($mode)
	{
		if ($this->_dState !== SERIAL_DEVICE_SET)
		{
			trigger_error("Unable to set flow control mode : the device is either not set or opened", E_USER_WARNING);
			return false;
		}

		$linuxModes = array(
			"none"     => "clocal -crtscts -ixon -ixoff",
			"rts/cts"  => "-clocal crtscts -ixon -ixoff",
			"xon/xoff" => "-clocal -crtscts ixon ixoff"
		);
		$windowsModes = array(
			"none"     => "xon=off octs=off rts=on",
			"rts/cts"  => "xon=off octs=on rts=hs",
			"xon/xoff" => "xon=on octs=off rts=on",
		);

		if ($mode !== "none" and $mode !== "rts/cts" and $mode !== "xon/xoff") {
			trigger_error("Invalid flow control mode specified", E_USER_ERROR);
			return false;
		}

		if ($this->_os === "linux")
			$ret = $this->_exec("stty -F " . $this->_device . " " . $linuxModes[$mode], $out);
		else
			$ret = $this->_exec("mode " . $this->_windevice . " " . $windowsModes[$mode], $out);

		if ($ret === 0) return true;
		else {
			trigger_error("Unable to set flow control : " . $out[1], E_USER_ERROR);
			return false;
		}
	}

	/**
	 * Sets a setserial parameter (cf man setserial)
	 * NO MORE USEFUL !
	 * 	-> No longer supported
	 * 	-> Only use it if you need it
	 *
	 * @param string $param parameter name
	 * @param string $arg parameter value
	 * @return bool
	 */
	function setSetserialFlag ($param, $arg = "")
	{
		if (!$this->_ckOpened()) return false;

		$return = exec ("setserial " . $this->_device . " " . $param . " " . $arg . " 2>&1");

		if ($return{0} === "I")
		{
			trigger_error("setserial: Invalid flag", E_USER_WARNING);
			return false;
		}
		elseif ($return{0} === "/")
		{
			trigger_error("setserial: Error with device file", E_USER_WARNING);
			return false;
		}
		else
		{
			return true;
		}
	}

	//
	// CONFIGURE SECTION -- {STOP}
	//

	//
	// I/O SECTION -- {START}
	//

	/**
	 * Sends a string to the device
	 *
	 * @param string $str string to be sent to the device
	 * @param float $waitForReply time to wait for the reply (in seconds)
	 */
	function sendMessage ($str, $waitForReply = 0.1)
	{
		$this->_buffer .= $str;

		if ($this->autoflush === true) $this->flush();

		usleep((int) ($waitForReply * 1000000));
	}

	/**
	 * Reads the port until no new datas are availible, then return the content.
	 *
	 * @pararm int $count number of characters to be read (will stop before
	 * 	if less characters are in the buffer)
	 * @return string
	 */
	function readPort ($count = 0)
	{
		if ($this->_dState !== SERIAL_DEVICE_OPENED)
		{
			trigger_error("Device must be opened to read it", E_USER_WARNING);
			return false;
		}

		if ($this->_os === "linux")
		{
			$content = ""; $i = 0;

			if ($count !== 0)
			{
				do {
					if ($i > $count) $content .= fread($this->_dHandle, ($count - $i));
					else $content .= fread($this->_dHandle, 128);
				} while (($i += 128) === strlen($content));
			}
			else
			{
				do {
					$content .= fread($this->_dHandle, 128);
				} while (($i += 128) === strlen($content));
			}

			return $content;
		}
		elseif ($this->_os === "windows")
		{
			/* Do nohting : not implented yet */
		}

		trigger_error("Reading serial port is not implemented for Windows", E_USER_WARNING);
		return false;
	}

	/**
	 * Flushes the output buffer
	 *
	 * @return bool
	 */
	function flush ()
	{
		if (!$this->_ckOpened()) return false;

		if (fwrite($this->_dHandle, $this->_buffer) !== false)
		{
			$this->_buffer = "";
			return true;
		}
		else
		{
			$this->_buffer = "";
			trigger_error("Error while sending message", E_USER_WARNING);
			return false;
		}
	}

	//
	// I/O SECTION -- {STOP}
	//

	//
	// INTERNAL TOOLKIT -- {START}
	//

	function _ckOpened()
	{
		if ($this->_dState !== SERIAL_DEVICE_OPENED)
		{
			trigger_error("Device must be opened", E_USER_WARNING);
			return false;
		}

		return true;
	}

	function _ckClosed()
	{
		if ($this->_dState !== SERIAL_DEVICE_CLOSED)
		{
			trigger_error("Device must be closed", E_USER_WARNING);
			return false;
		}

		return true;
	}

	function _exec($cmd, &$out = null)
	{
		$desc = array(
			1 => array("pipe", "w"),
			2 => array("pipe", "w")
		);

		$proc = proc_open($cmd, $desc, $pipes);

		$ret = stream_get_contents($pipes[1]);
		$err = stream_get_contents($pipes[2]);

		fclose($pipes[1]);
		fclose($pipes[2]);

		$retVal = proc_close($proc);

		if (func_num_args() == 2) $out = array($ret, $err);
		return $retVal;
	}

	//
	// INTERNAL TOOLKIT -- {STOP}
	//
}
?>

 

And this is the index file of the website

 





<?php
//check the GET action var to see if an action is to be performed
if (isset($_GET['action'])) {
    //Action required
    
    //Load the serial port class
    include "php_serial.class.php";
    
    //Initialize the class
    $serial = new phpSerial();

    //Specify the serial port to use... in this case COM1
    $serial->deviceSet("COM1");
    
    //Set the serial port parameters. The documentation says 9600 8-N-1, so
    $serial->confBaudRate(9600); //Baud rate: 9600
    $serial->confParity("none");  //Parity (this is the "N" in "8-N-1")
    $serial->confCharacterLength(; //Character length (this is the "8" in "8-N-1")
   
    $serial->confStopBits(1);  //Stop bits (this is the "1" in "8-N-1")
    $serial->confFlowControl("none");
//Device does not support flow control of any kind, 
//so set it to none.

    //Now we "open" the serial port so we can write to it
    $serial->deviceOpen();

    //Issue the appropriate command according to the serial relay 
    //board documentation
    if ($_GET['action'] == "on") {
        //to turn relay number 1 on, we issue the command 
		for ($x = 1; $x<20; $x++) //loops output
        $serial->sendMessage("3");
    
    } else if ($_GET['action'] == "off") {
        //to turn relay number 1 off, we issue this command
		for ($x = 1; $x<20; $x++) //loops output
        $serial->sendMessage("2");
    }
    
    //We're done, so close the serial port again
    $serial->deviceClose();

}?>

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" 
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<title>Serial Control Test</title>
</head>
<body>

<h1>Serial Control Test</h1>
<p><a href="<?=$_SERVER['PHP_SELF'] . "?action=on" ?>">
Click here to turn the system on.</a></p>
<p><a href="<?=$_SERVER['PHP_SELF'] . "?action=off" ?>">
Click here to turn the system off.</a></p>
</body>
</html>

 

Thanks for your help guys!

Link to comment
https://forums.phpfreaks.com/topic/275345-serial-class-has-long-delay/
Share on other sites
This thread is more than a year old. Please don't revive it unless you have something important to add.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.