tibberous Posted February 24, 2011 Share Posted February 24, 2011 I have a Gigabyte GA-870A-UD3 . A couple hard drives got unplugged and now instead of a 4 disk array I have 2. This is MORE risky than not running RAID! I plugged the drives back in, and it sees them, but it won't let me re-add them to the raid array. Even if the information on them is out of sync, I should be able to format over them and add them like a new drive, right? Link to comment https://forums.phpfreaks.com/topic/228745-how-can-i-get-hard-drives-back-into-my-raid-array/ Share on other sites More sharing options...
JonnoTheDev Posted February 28, 2011 Share Posted February 28, 2011 ven if the information on them is out of sync, I should be able to format over them and add them like a new drive, right? Correct. I would boot the server and get into the RAID controller configuration (should see a prompt when the controller is detected). Format the drives within the setup area. Restart the server. Link to comment https://forums.phpfreaks.com/topic/228745-how-can-i-get-hard-drives-back-into-my-raid-array/#findComment-1180712 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.