unlishema.wolf Posted November 22, 2011 Share Posted November 22, 2011 Ok I have had some bad issues with internet recently. And I have finally found a way to give all the computers in my house internet using ICS. But I have a problem. First I will share the setup: My Host computer is connected to a wireless access point. (Runs Windows XP SP3) I connect my router to my Host coumpter via Ethernet Calbe. (Linksys WRT300n Router) Server computer is connect to the router via Ethernet Cable. (Running Linux Server 10.04.1) My fathers computer is connect to the router via Ethernet Cable. (Runs Windows XP SP3) I am able to access my server computer via SSH and HTTP on my Host computer and my fathers computer. I can access the router's setup via my fathers computer. I can't access my router's setup via my Host computer though. I am not sure if I have a setting wrong or if I just need to use the correct local address. If anybody can help me with this I would be very grateful. I have been search for this method of ICS all day and can't find anything about the Host computer accessing the router. Note: Not sure if I am posting this is the correct section or even if I can post this on this forum. But I am sure there are people that have experience in this field here. Link to comment https://forums.phpfreaks.com/topic/251639-problems-with-home-network/ Share on other sites More sharing options...
requinix Posted November 23, 2011 Share Posted November 23, 2011 How are you trying to get to the router? IP address or name? What address/name? Link to comment https://forums.phpfreaks.com/topic/251639-problems-with-home-network/#findComment-1290636 Share on other sites More sharing options...
unlishema.wolf Posted November 23, 2011 Author Share Posted November 23, 2011 ~Wireless Internet Connection~ Host PC IP: 192.168.43.40 Host PC Gateway: 192.168.43.1 ~Wired Internet Connection~ Host PC IP: 192.168.0.1 (ICS address) Router Static IP: 192.168.0.236 (This is what I use to access my server computer from host computer) I port forward ports 80 and 22 to my server computer. ~On my fathers computer~ Father's PC IP: 192.168.1.101 Father's PC Gateway: 192.168.1.1 Server PC IP: 192.168.1.106 (I need to make these static was 102 before) Router IP: 192.168.1.1 Host PC IP: 192.168.0.1 Link to comment https://forums.phpfreaks.com/topic/251639-problems-with-home-network/#findComment-1290661 Share on other sites More sharing options...
unlishema.wolf Posted November 23, 2011 Author Share Posted November 23, 2011 Ok I made the server's IP static. It is now 192.168.1.100 on my father's pc. Also if I go to 192.168.0.1 on my host computer. It loads my host computer's wamp server. (Used wamp cause I couldn't connect to my server computer. And have been using it to test this stuff out.) Link to comment https://forums.phpfreaks.com/topic/251639-problems-with-home-network/#findComment-1290664 Share on other sites More sharing options...
unlishema.wolf Posted November 23, 2011 Author Share Posted November 23, 2011 Ok I finally found out what I did wrong. I set it up for https and the port is 8080 so my routers IP is https://192.168.0.236:8080 Thanks for trying to help. Took about 8 hours to get everything to work. Finally I got it Link to comment https://forums.phpfreaks.com/topic/251639-problems-with-home-network/#findComment-1290669 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.